Wood Sanding Equipment

WEBER LCS

WEBER LCS
Wide Belt Sanding Machine

The entry-level model from WEBER for wood sanding and veneer sanding
``````````

The LCS series possesses the WEBER sanding technology with the patented ISA segmented platen system within the framework of a single or double belt version. The single belt machine is equipped with a combined station, the double belt machine has a contact roller station as well as a combined station. Calibrating and finish sanding can be performed individually or in combination.

WEBER LCS Technical Data

Operating widths upwards of 1100 and 
1300 mm

Segmented platen ISA

Version with 1 to 2 sanding stations

Combined button and touch screen operation

Calibrating roller drive up to 15 kW

Automatic workpiece thickness setting

Infinitely variable feed speed (1–10 m/min)

Universal sanding lamella

Sanding belt length 1900 mm

 

 

Wide Belt Sanding

 

The contact roller is used in the production of plain surfaces, what is also known as calibration. The spiralshaped, grooved roller guarantees the highest degree of precision and enables large chip removal and ensures a long service life as well. The sanding pad serves to ensure improved surface quality - with solid wood and veneers. The segmented version of the sanding pad with electronic control can process tolerances up to 2 mm with the highest consistent quality.

 

WEBER Cross sanding

 

Automatic cross sanding machines for the skilled trades have a long tradition at WEBER. Cross sanding means that the first sanding is performed crosswise to the feed direction and subsequent finish sanding in lengthwise direction. The crisscrossing cutting motion offers advantages over multiple inclined or lengthwise sanding steps. The cross belt operates at a 90° angle perpendicular to the grain. As a result, the fibrous surface texture, which normally runs lengthwise, is divided into small sections and subsequent removal is simplified. This removal is subsequently carried out using one or more wide sanding belts. Due to the crisscrossing sanding directions, considerably fewer and shorter fibres remain on the surface.

 

WEBER “X-Schliff”

 

Flexibility is becoming more and more important. For this reason, WEBER “X-Schliff“ offers all the sanding processes combined in a single station. The sanding station can be easily converted from wide belt to cross belt sanding. Thus, sanding processes can alternate between calibration, longitudinal or cross sanding or using WEBER CBF sanding technology. As today‘s requirements for various surfaces and lacquers call for different sequences of crosswise and lengthwise sanding, this new technology is able to respond to it. It enables lengthwise or crosswise final sanding, thus saving an additional machining station.

 

WEBER ISA Segmented platen

 

A good sanding result is dependent upon reliable segmented platen technology, which adjusts the sanding pressure of individual segments to the workpiece size via electronic control. With the patented WEBER ISA version the pressure pieces and sanding lamella form one unit. This unit is maintenance-free and resistant to dirt.

Top